Size | CUT IN SIZE |
Single Piece Length | 3 meter,6 meter,18 meter,36 meter,>36 meter |
Test Certificate | MTC |
Thickness/Diameter | 0-1 inch,1-2 inch,2-3 inch,3-4 inch,>4 inch |
Finish | Polished,Unpolished |
Surface Finishing | BRIGHT |
ISO Certified | Yes |
The chemical composition of Grade 15-5 PH stainless steel is outlined in the following table.
Element | Content (%) |
---|---|
Iron, Fe | 75 |
Chromium, Cr | 14.48 |
Nickel, Ni | 4.5 |
Copper, Cu | 3.5 |
Manganese, Mn | ≤1 |
Silicon, Si | ≤1 |
Nb + Ta | 0.3 |
Carbon, C | ≤0.07 |
Phosphorous, P | ≤0.04 |
Sulfur, S | ≤0.03 |
The mechanical properties of Grade 15-5 PH stainless steel are displayed in the following table.
Properties | Metric | Imperial |
---|---|---|
Tensile Strength | 1380 MPa | 200000 psi |
Yield Strength | 1275 MPa | 184900 psi |
Modulus of Elasticity | 200 GPa | 29000 ksi |
Elongation at Break | 10% | 10% |
Hardness, Brinell | 420 | 420 |
Hardness, Knoop | 451 | 451 |
Hardness, Rockwell B | 104 | 104 |
Hardness, Rockewell C | 44.2 | 44.2 |
Hardness, Vickers | 445 | 445 |
Charpy Impact | 10 J | 7.38 ft.lb |
Minimum Order Quantity | 5 Kg |
Shape | Round, Square |
Thickness/Diameter | 0-1 inch, 2-3 inch, 1-2 inch, >4 inch, 3-4 inch |
Condition | H-1025, H-900 |
Test Certificate | MTC |
Single Piece Length | 6 meter, 3 meter |
Application | Manufacturing |
Finish | Polished |
ISO Certified | Yes |
Payment Terms | credit |
Minimum Order Quantity | 2 Kg |
Material Grade | s S 17-7 PH |
Surface Treatment | Hot Rolled,Cold Rolled |
Steel Grade | SS316 L |
Type | Plate,Coil |
Thickness | 0-1 mm,1-2 mm,2-3 mm,3-4 mm |
Certification | ISO |
The two main properties of precipitation-hardened stainless steels are high corrosion resistance and high strength. Stainless steel grade 17-7 PH is a precipitation hardened stainless steel that possesses high strength and hardness, excellent fatigue properties, good formability, good corrosion resistance, and minimal distortion upon heat treatment. The properties of this alloy are well suited for aerospace applications.
Stainless steel grade 17-7 PH is suitable for use in fresh water and industrial atmospheres, and mild chemical and oxidizing environments. It is recommended that 17-7 PH should not be used in salt water or reducing environments.
The following sections will discuss in stainless steel grade 17-7 PH in further detail.
Chemical CompositionThe chemical composition of stainless steel grade 17-7 PH is outlined in the following table.
Element | Content (%) |
---|---|
Chromium, Cr | 16-18 |
Nickel, Ni | 6.50 - 7.75 |
Manganese, Mn | 1 max |
Silicon, Si | 1 max |
Aluminum, Al | 0.75 - 1.50 |
Carbon, C | 0.09 max |
Phosphorous, P | 0.040 max |
Sulfur, S | 0.030 max |
Iron, Fe | Balance |
The physical properties of stainless steel grade 17-7 PH are tabulated below.
Properties | Metric | Imperial |
---|---|---|
Density | 7.80 g/cm3 | 0.282 lb/in3 |
The following table shows mechanical properties of stainless steel grade 17-7 PH (TH1050, bar and forgings).
Properties | Metric | Imperial |
---|---|---|
Tensile strength | 1170 MPa | 170000 psi |
Yield strength | 965 MPa | 140000 psi |
Modulus of elasticity | 204 GPa | 29600 ksi |
Poisson’s ratio | 0.27-0.30 | 0.27-0.30 |
Elongation at break | 6% | 6% |
Hardness, Rockwell C | 38 | 38 |