Neptune Alloys
C.P TANK, Mumbai, Maharashtra
GST No. 27AYDPJ0569L1Z5
08047630804 89% Response Rate
Send E-mail
- Home
- »
- Our Products
- »
- Nickel Alloy Round Bars
| Application | Construction, Manufacturing |
| Single Piece Length | 6 meter, 3 meter |
| Thickness/Diameter | 3-4 inch, 0-1 inch, >4 inch, 1-2 inch, 2-3 inch |
| Shape | Square, Hex, Round |
| Grade | 2205 |
| Condition | New |
Table 1. Some standard designations for duplex stainless steel alloys
Euronorm | UNS | BS | En | Grade |
1.4462 | S31803 | 318S13 | - | 2205 |
1.4507 | S32520 | - | - | UR52N+ |
Table 2. Typical chemical composition for two duplex stainless steel alloys
% | 2205 | UR52N+ |
C | 0-0.03 | 0.03 max |
Mn | 2.0 | 1.5 |
Si | 1.0 | 0.8 |
P | 0-0.03 | 0.035 |
S | 0-0.02 | 0.02 |
Cr | 21-23 | 24-26 |
Mo | 2.5-3.5 | 3.0-5.0 |
Ni | 4.5-6.5 | 5.5-8.0 |
N | 0.08-0.2 | 0.2-0.35 |
Cu | - | 0.5-3.0 |
Properties of Duplex stainless steelMechanical Properties of Duplex stainless steel
Table 3. Typical mechanical properties of two duplex stainless steel alloys
Grade | 2205 | UR52N+ |
Tensile Strength (MPa) | 620 | 770 |
Proof Stress 0.2% (MPa) | 450 | 550 |
Elongation A5 (%) | 25 | 25 |
Table 4. Typical physical properties of two duplex stainless steel alloys
Property | 2205 | UR52N+ |
Density (g.cm3) | 7.805 | 7.810 |
Modulus of Elasticity (GPa) | 200 | 205 |
Electrical Resistivity (Ω.m) | 0.085x10-6 | 0.085x10-6 |
Thermal Conductivity (W/m.K) | 19 at 100°C | 17 at 100°C |
Thermal Expansion (m/m.K) | 13.7x10-6 to 100°C | 13.5x10-6 to 200°C |
| Size | CUT IN SIZE |
| Application | Construction, Manufacturing |
| Single Piece Length | 3 meter, 6 meter |
| Thickness/Diameter | 1-2 inch, 2-3 inch, >4 inch, 0-1 inch, 3-4 inch |
| Shape | Square, Round, Hex |
| Delivery Details | 0-2 days, 3-5 days, 6-8 days |
| Condition | New |
Table 1 provides the compositional ranges for grade 2205 duplex stainless steel.
Table 1 - Composition ranges for 2205 grade stainless steels
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
2205 (S31803) | Min Max | - 0.030 | - 2.00 | - 1.00 | - 0.030 | - 0.020 | 21.0 23.0 | 2.5 3.5 | 4.5 6.5 | 0.08 0.20 |
2205 (S32205) | Min Max | - 0.030 | - 2.00 | - 1.00 | - 0.030 | - 0.020 | 22.0 23.0 | 3.0 3.5 | 4.5 6.5 | 0.14 0.20 |
The typical mechanical properties of grade 2205 stainless steels are listed in the table below. Grade S31803 has similar mechanical properties to that of S32205.
Table 2 - Mechanical properties of 2205 grade stainless steels
Grade | Tensile Str | Yield Strength | Elongation | Hardness | |
Rockwell C (HR C) | Brinell (HB) | ||||
2205 | 621 | 448 | 25 | 31 max | 293 max |
The physical properties of grade 2205 stainless steels are tabulated below. Grade S31803 has similar physical properties to that of S32205.
Table 3 – Physical properties of 2205 grade stainless steels
Grade | Density | Elastic (GPa) | Mean Co-eff of Thermal | Thermal | Specific ( J/kg.K) | Electrical | |||
0-100°C | 0-315°C | 0-538°C | at 100°C | at 500°C | |||||
2205 | 782 | 190 | 13.7 | 14.2 | - | 19 | - | 418 | 850 |
| Wire Gauge | 8 SWG |
| Power/Voltage | 220 V |
| Form | Wire |
| Round Wire | Yes |
| Country of Origin | Made in India |
*Your information is safe with us.
| Type | Plate |
| Material | Stainless Steel |
| Usage/Application | Utilities Water |
| Single Piece Length | 18 meter |
| Country of Origin | Made in India |
| Wire Gauge | 8 SWG |
| Power/Voltage | 220 V |
| Form | Wire |
| Round Wire | Yes |
| Country of Origin | Made in India |
| Wire Gauge | 8 SWG |
| Power/Voltage | 220 V |
| Form | Wire |
| Round Wire | Yes |
| Country of Origin | Made in India |
*Your information is safe with us.
| Wire Gauge | 8 SWG |
| Power/Voltage | 220 V |
| Form | Wire |
| Round Wire | Yes |
| Country of Origin | Made in India |
| Usage/Application | Surgical & Medical Parts,Threaded Bars,Studs,Bolts,Pins,Hinges and Handles |
| Material | Stainless Steel |
| Surface treatment | Black,Bright Polished,Rough Turned,NO. 4 Finish,Matt Finish,BA Finish. |
| Brand | Neptune Alloys |
| Length | 1 to 6 Meters,Custom Cut Lengths |
| Country of Origin | Made in India |
| Material Grade | 300 |
| Usage/Application | Manufacturing |
| Single Piece Length | 6 meter |
| Test Certificate | MTC |
| Finish | Polished |
| Thickness/Diameter | 1-2 inch |
| Surface Finishing | BRIGHT |
The chemical composition of stainless steel grade 254 SMO™ is outlined in the following table.
| Element | Content (%) |
|---|---|
| Iron, Fe | 55.69 |
| Chromium, Cr | 20 |
| Nickel, Ni | 18 |
| Molybdenum, Mo | 6.1 |
| Nitrogen, N | 0.20 |
| Carbon, C | 0.010 |
The physical properties of stainless steel grade 254 SMO™ are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 8 g/cm3 | 0.289 lb/in3 |
The following table shows mechanical properties of stainless steel grade 254 SMO™.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 680 MPa | 98600 psi |
| Yield strength | 300 MPa | 43500 psi |
| Modulus of elasticity | 195 GPa | 28300 ksi |
| Shear modulus | 75 GPa | 10900 ksi |
| Poisson’s ratio | 0.30 | 0.30 |
| Elongation at break | 50 % | 50 % |
| Hardness, Brinell | 210 | 210 |
The thermal properties of stainless steel grade 254 SMO™ are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Thermal expansion co-efficient (@20-100°C/68-212°F) | 16.5 µm/m°C | 9.17 µin/in°F |
| Thermal conductivity | 14 W/mK | 97.2 BTU in/hr.ft².°F |
*Your information is safe with us.
| Size/Diameter | 3 inch |
| Single Piece Length | 6 meter, 3 meter |
| Application | Chemical Handling |
| Material | AMS 5872 |
| Brand | SPECIAL METALS |
| Shape | ROUND |
| Range | 6MM DIA TO 350MM DIA |
| Material Grade | NIMONIC 263 |
| Is It ISO Certified | ISO Certified |
| Usage/Application | Manufacturing |
| I deal in | New Only |
| Element | Percent By Weight | |
|---|---|---|
| Ni | Nickel | 52% |
| Co | Cobalt | 20% |
| Cr | Chromium | 20% |
| Mo | Molybdenum | 6% 2.4% |
| Ti | Titanium | 0.6% |
| Usage/Application | Industrial |
| Material | Hastelloy |
| Grade | C276 |
| Country of Origin | Made in India |
| Minimum Order Quantity | 1 Kg |
| Single Piece Length | 6 meter, 18 meter, >36 meter, 3 meter, 36 meter |
| Size/Diameter | 1/2 inch,1 inch,2 inch,3 inch,4 inch |
| Usage | Manufacturing |
| Brand | NEPTUNE |
| Shape | CUT IN SIZE |
| ISO Certified | Yes |
| Finish | BRIGHT |
*Your information is safe with us.
| Color | Silver |
| Single Piece Length | 6 meter |
| Usage/Application | Manufacturing |
| Finish | Polished |
| Single Piece Length | 6 meter |
| Brand | Neptune |
| Usage/Application | Manufacturing |
| Finish | Polished |
| Type | Rods |
| Color | Silver |
| Material Grade | NIMONIC 80A |
| Surface Finish | BRIGHT |
| Shape | ROUND |
| Length | 5/6 METERS |
| Size | 6MM DIA to 350MM DIA |
| Brand | SPECIAL METAL |
NIMONIC alloys are primarily composed of nickel and chromium. These alloys are known for their high-temperature low-creep and high performance. Additives like aluminium, carbon and titanium are infused into the alloy. The NIMONIC alloy was first developed in 1940 in England. NIMONIC alloys available commercially are NIMONIC 75, NIMONIC 80A, 81, 86, NIMONIC PE11 and 16.
NIMONIC alloy 80A is a wrought, age-hardened alloy that is strengthened by additives like titanium, aluminium and carbon. It is manufactured by high-frequency melting and casting in air. It is similar to NIMONIC alloy 75. It has good corrosion and oxidation resistance. The creep rupture and tensile properties are high at 815°C (1500°F).
This datasheet will look into the chemical composition, properties and applications of NIMONIC alloy 80A.
Chemical CompositionThe chemical composition of NIMONIC alloy 80A is given in the following table.
| Element | Content (%) |
|---|---|
| Nickel, Ni | 69 |
| Chromium, Cr | 18-21 |
| Iron, Fe | ≤3 |
| Cobalt, Co | ≤2 |
| Titanium, Ti | 1.8-2.7 |
| Aluminum, Al | 1.0-1.8 |
| Others | Remainder |
*Your information is safe with us.
| Size/Diameter | 1/2 inch |
| Material | Stainless Steel |
| Usage/Application | Construction |
| Length | 3m |
| Country of Origin | Made in India |
| Size/Diameter | 6mm |
| Material | Stainless Steel |
| Length | 3 meter |
| Usage/Application | Construction |
| Material Grade | Inconel 600 |
| Country of Origin | Made in India |
| Diameter | 1/2 inch |
| Length of Pipe | 3 m |
| Material | Alloy Steel |
| Usage/Application | Utilities Water |
| Single Piece Length | 3 meter |
| Brand | Jindal |
| Shape | Round |
*Your information is safe with us.
| Size/Diameter | 6mm |
| Material | Stainless Steel |
| Length | 3 meter |
| Usage/Application | Construction |
| Material Grade | Inconel 600 |
| Country of Origin | Made in India |
| Size/Diameter | 6mm |
| Material | Stainless Steel |
| Length | 3 meter |
| Usage/Application | Construction |
| Material Grade | Inconel 600 |
| Country of Origin | Made in India |
| Size/Diameter | 1/2 inch |
| Material | Stainless Steel |
| Usage/Application | Construction |
| Length | 3m |
| Country of Origin | Made in India |
*Your information is safe with us.
| Size/Diameter | 1/2 inch |
| Material | Stainless Steel |
| Usage/Application | Construction |
| Length | 3m |
| Country of Origin | Made in India |
| Size/Diameter | 6mm |
| Material | Stainless Steel |
| Length | 3 meter |
| Usage/Application | Construction |
| Material Grade | Inconel 600 |
| Country of Origin | Made in India |
| Size/Diameter | 6mm |
| Material | Stainless Steel |
| Usage/Application | Construction |
| Length | 3 meter |
| Material Grade | Inconel 600 |
| Country of Origin | Made in India |
*Your information is safe with us.
| Size/Diameter | 1/2 inch |
| Material | Stainless Steel |
| Usage/Application | Construction |
| Finished | Polished |
| Country of Origin | Made in India |
| Size/Diameter | 6mm |
| Material | Stainless Steel |
| Length | 3 meter |
| Usage/Application | Construction |
| Material Grade | Inconel 600 |
| Country of Origin | Made in India |
| Size/Diameter | 5.5mm |
| Material | Stainless Steel |
| Usage/Application | Construction |
| Surface | Polished |
| Country of Origin | Made in India |
*Your information is safe with us.
| Size/Diameter | 6mm |
| Material | Stainless Steel |
| Length | 3 meter |
| Usage/Application | Construction |
| Material Grade | Inconel 600 |
| Country of Origin | Made in India |
| Size/Diameter | 6mm |
| Material | Stainless Steel |
| Length | 3 meter |
| Usage/Application | Construction |
| Material Grade | Inconel 600 |
| Country of Origin | Made in India |
| Size/Diameter | 6mm |
| Material | Stainless Steel |
| Length | 3 meter |
| Usage/Application | Construction |
| Material Grade | Inconel 600 |
| Country of Origin | Made in India |
*Your information is safe with us.
| Size | 5 mm To 500 mm |
| Size/Diameter | 2 inch |
| Single Piece Length | 6 meter |
| Material | SS |
| Shape | CUT IN SIZE |
| Finishing | Polished |
| Finish | Black,Bright Polished,Rough Turned,NO.4 Finish,Matt Finish,BA Finish |
| Minimum Order Quantity | 1 Kg |
| Single Piece Length | 6 meter, 3 meter |
| Size | 6mm DIA TO 200MM DIA |
| Type | Plate, Sheet, Bar, HEX |
| Material | INCONEL 600 ROD |
| Shape | ROUND |
| Grade | INCONEL 600 |
| Usage/Application | Construction |
| Color | RED BLUE |
| Diameter | 6MM DIA TO 200MM DIA |
| Material Grade | INCONEL 600 |
| Surface | POLISHED |
| Standard | AMS B166 |
| Working Temp. | 2500 |
| Place Of Origin | Europe |
| Payment Terms | CREDIT |
| Test Certificate | MTC |
Inconel 600 is a nickel-chromium alloy with good oxidation resistance at higher temperatures, with good resistance in carburizing and chloride containing environments.
Inconel 600 is a nickel-chromium alloy designed for use from cryogenic to elevated temperatures in the range of 2000 deg F(1093 deg C). The high nickel content of the alloy enables it to retain considerable resistance under reducing conditions and makes it resistant to corrosion by a number of organic and inorganic compounds. The nickel content gives it excellent resistance to chloride-ion stress-corrosion cracking and also provides excellent resistance to alkaline solutions.
Its chromium content gives the alloy resistance to sulfur compounds and various oxidizing environments. The chromium content of the alloy makes it superior to commercially pure nickel under oxidizing conditions. In strong oxidizing solutions like hot, concentrated nitric acid, 600 has poor resistance. Alloy 600 is relatively un-attacked by the majority of neutral and alkaline salt solutions and is used in some caustic environments. The alloy resists steam and mixtures of steam, air and carbon dioxide.
Alloy 600 is non-magnetic, has excellent mechanical properties and a combination of high strength and good workability and is readily weldable. Inconel 600 exhibits cold forming characteristics normally associated with chromium-nickel stainless steels.
Typical corrosion applications include titanium dioxide production (chloride route), perchlorethylene syntheses, vinyl chloride monomer (VCM), and magnesium chloride. Alloy 600 is used in chemical and food processing, heat treating, phenol condensers, soap manufacture, vegetable and fatty acid vessels and many more.
| Single Piece Length | 3 meter, 6 meter |
| Size | 1MM DIA TO 300MM DIA |
| Type | Plate, Bar |
| Material | INCONEL X750 ROD |
| Shape | ROUND |
| Usage/Application | Manufacturing |
| Diameter | 1MM DIA TO 150MM DIA |
| Surface Treatment | POLISHED |
*Your information is safe with us.
| Material | SS |
| Grade | 304 |
| Finishing | Polished |
| Technique | Hot Rolled |
| Single Piece Length | 6 meter |
| Type | Plate |
| Material | SS |
| Grade | 304 |
| Single Piece Length | 6 meter |
| Type | Plate |
| Material | SS |
| Grade | 304 |
*Your information is safe with us.
| Single Piece Length | 6 meter |
| Type | Plate |
| Material | SS |
| Grade | 304 |
| Single Piece Length | 6 meter |
| Type | Plate |
| Material | SS |
| Grade | 304 |
| Single Piece Length | 6 meter |
| Type | Plate |
| Material | SS |
| Usage/Application | Manufacturing |
*Your information is safe with us.
| Single Piece Length | 6 m |
| Material | SS |
| Melting Point | 20 Degree C |
| Tensile Strength | 21 Mpa |